KB 20/100

 Transportation length: 5.040 mm
 Transportation height: 2.200 mm
 Transportation width: 820 mm
 Height work position: 
 4.690 / 5.990 mm
 Weight: 3.400 kg
 Power: 53,7 kW
 Info: Basic rig with options for various applications
 Dry drilling with casings  Drilling diameter: 219 mm          Drilling depth: 20 m 
 Drilling diameter: 178 mm          Drilling depth: 40 m
 Drilling with hollow stem 
 auger HBS 185/100
 Drilling diameter: 195 mm 
 Drilling depth: 40 m
 Direct rotary drilling  Drilling diameter: 190 mm 
 Drilling depth: 100 m
 Down-the-hole-hammer 
 drilling
 Drilling diameter: 190 mm 
 Drilling depth: 100 m
 Core drilling  Drilling diameter: 146 mm
 Drilling depth: 100 m
 Chassis  Hydraulic driven rubber crawler 
 Chassis - telescopically 820 until 1200 mm 
 Driving control system at rear rig position left side
 optionally with cable remote control 
 Engine  Four-cylinders diesel engine oil- air-cooled 
 Rotation speed control: 2.500 rpm 
 Electric starter, generator, working hour meter
 Hydraulic system  Triplex- gear pump 20/20/15 l/min + single pump 11 l/min by 2.500 rpm, 200 bar 
 Hydraulic oil tank: 120 l 
 Oil-air-radiator 
 Bio hydraulic oil HEES 46
 Drill mast  Feeder system with hydraulic cylinder and flyer chain system 
 Lifting force: 48 kN 
 Feed force: 32 kN 
 Stroke: 2.300 mm
 Hydraulic drill head BK 4000  Hydraulic two gears 
 Performance 125 l/min und 200 bar: 
 1.gear: 4.000 Nm, 65 rpm 
 2.gear: 2.000 Nm, 130 rpm 
 Free passage of water swivel: 65 mm 
 optional: 
 Hydraulic drill head BK 4000/3  
 Hydraulic three gears 
 Performance (three gears) at 90 l/min und 200 bar: 
 1. gear: 4.000 Nm, 65 rpm 
 2. gear: 2.000 Nm, 130 rpm 
 3. gear: 1.000 Nm, 260 rpm 
 Free passage of water swivel: 65 mm
 optional: 
 Hydraulic drill head BK 5000
 Hydraulic two gears: 
 Performance (three gears) at 90 l/min und 200 bar: 
 1.gear: 5.000 Nm, 50 rpm 
 2.gear: 2.500 Nm, 100 rpm 
 3. gear: 1.250 Nm, 200 rpm 
 Free passage of water swivel: 65 mm
 Hydraulic lifting clamp 219  Free passage: 219 mm 
 Lifting force: 150 kN 
 Stroke: 200 mm 
 Cartridges for all diameters of casings and drill rods
 Hydraulic lifting clamp 324   Free passage: 324 mm 
 Lifting force: 150 kN 
 Stroke: 200 mm 
 Cartridges for all diameters of casings and drill rods  
 Hydraulic 
 casing breaking clamp
 max. passage: 219 mm 
 max. breakaway torque: 6,2 kNm 
 max. swivelling angle: 18°
  Hydraulic casing clamp  max. passage: 219 mm 
 mounted to lower mast end 
 in case casing breaking clamp is mounted
 Hydraulic 
 casing breaking clamp 
 with lifting cylinders
 max. passage: 219 mm 
 max. breakaway torque: 6,2 kNm 
 max. swivelling angle: 18° 
 Stroke: 200 mm 
 Lifting force: 150 kN
 Hydraulic rod clamp  max. free passage: 140 mm
 Clamping force: 220 kN 
 opening and folding to both sides 
 Hydraulic winch  max. pull force: 8 kN 
 Spool capacity: 40 m 
 Wire diameter: 7 mm
 optional: further 
 hydraulic winches 
 
 max. pull force: 8 or 15 kN 
 Spool capacity: 110 or 130 m 
 Wire diameter: 6 mm Speed: 43 or 90 m/min
 Hydraulic percussion system  Pull-up: 3 kN 
 Stroke: 300 mm 
 Percussion frequency: 40 per min
 Upper drilling mast extension   additional height for work with winch: 1.000 mm
 Mud pump  One-level horizontal centrifugal pump 
 Hydraulic power: 40 kW 
 Delivery volume: 720 l/min by 83 m delivery height
 optional: 
 Mud pump for core drilling 
 Eccentric screw pump with hydraulic motor 
 max. delivery volume: 100 l/min 
 max. operating pressure: 24 bar 
 More additional equipment  Waterinjection pump for down-the-hole hammer drilling 
 Cementation pump for geothermal bore holes 
 Bobbin mechanism for HDPE-tubes 
 Flushing box with venturi mixer 
 Depositionssystem for hammer drilling
           Next